13964193999
0531-83510047

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 新闻中心 > 常见问题 常见问题

输送带10米要加长到12米应该怎么做?

来源:http://www.huafengxiangsu.com 时间:2020-03-25 13:11:58 浏览次数:0
  输送带10米加长到12米,怎么加长
  How to lengthen the conveyor belt from 10m to 12m
  1、皮带扣接头〈优点:方便快捷、缺点:寿命短〉
  1. Belt buckle connector
  2、冷粘粘合剂来进行接头〈对切口处理需要、技术要求高、稳定性差〉
  2. Cold bonding adhesive for joint
  3、热硫化接头法、〈通过热处理、质量不错、寿命、稳定性高于上面二种操作方式〉。
  3. Hot vulcanization joint method, "through heat treatment, good quality, life, stability higher than the above two operation modes".
  输送带机械接头法:
  Mechanical joint method of conveyor belt:
  一般是指使用皮带扣接头,这种接头方法方便便捷,也比较经济,但是接头的效率低,容易损坏,对输送带产品的使用寿命有一定影响。 PVC和PVG整芯阻燃抗静电输送带接头中,一般8级带以下的产品都采用这种接头方法。
  Generally, it refers to the use of buckle joint. This joint method is convenient and economic, but the joint efficiency is low and easy to damage, which has a certain impact on the service life of conveyor belt products. In the joints of PVC and PVG whole core flame retardant and antistatic conveyor belt, the joint method is generally used for products below grade 8 belt.
  输送带冷粘接头法:
  Conveyor belt cold bonding head method:
大倾角输送带
  输送带接头:
  Belt joint:
  即采用冷粘粘合剂来进行接头。这种接头办法比机械接头的效率高,也比较经济,应该能够有比较好的接头效果,但是从实践来看,由于工艺条件比较难掌握,另外粘合剂的质量对接头的影响非常大,所以不是很稳定。目前国内比较知名的粘接剂中圣卡SK811输送带胶、璜时得LDJ243系列等输送带胶都是国内使用量比较大的。
  That is to say, cold adhesive is used for joint. This joint method is more efficient and economical than mechanical joint, so it should have better joint effect. However, in practice, it is difficult to master the process conditions, and the quality of adhesive has a great influence on the joint, so it is not very stable. At present, the most well-known adhesives in China, such as sk811 conveyor belt adhesive and ldj243 series conveyor belt adhesive, are widely used in China.
  输送带热硫化接头法:
  Conveyor belt hot vulcanization joint method:
  输送带接头在多年的实战中证明是更理想的一种接头方法,能够保证高的接头效率,同时也非常稳定,接头寿命也很长,容易掌握。但是存在工艺麻烦、费用高、接头时间长等缺点。
  The conveyor belt joint has proved to be the most ideal joint method in many years of actual combat, which can ensure high joint efficiency, at the same time, it is very stable, and the joint life is also very long, easy to master. But there are some disadvantages, such as process trouble, high cost and long joint time.
  我们以优良的产品,贴心的服务,可靠的信誉,为您的事业成功助一臂之力,竭诚欢迎各界同仁惠顾洽谈业务:https://www.huafengxiangsu.com
  With excellent products, considerate service and reliable reputation, we will help you succeed in your business. We sincerely welcome all colleagues from all walks of life to visit and negotiate business: https://www.huafengxiangsu.com
上一篇:如何处理输送带撒料的问题?
下一篇:普通输送带的温度范围一般在多少?

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区