0531-83510047
13964193999

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 新闻中心 > 行业百科 > 行业百科

传送带出现纵向水波纹问题如何解决?

来源:http://www.huafengxiangsu.com 时间:2022-04-21 13:39:00 浏览次数:
  纵向水波纹现象的出现不知道您见到过没有?实际上该现象也会出现与传送带产品上,根据不同带芯特性得知,在硫化时尼龙和EP布受压后以平板中轴线为向两边延伸,当遇到垫铁后无法扩展,这种情况下就会形成纵向水波纹。那么传送带出现纵向水波纹问题如何解决?
  Have you ever seen the phenomenon of longitudinal water ripples? In fact, the phenomenon will also appear with the conveyor belt products, according to the characteristics of different cores, in vulcanization nylon and EP cloth compression to the plate axis as the center to extend to both sides, when the pad iron can not expand, in this case will form longitudinal water ripples. So how to solve the longitudinal water ripple problem of the conveyor belt?
  生产时传送带宽度应小于成品宽度,并尽量保持在成品宽度的99%左右,硫化时应适当放宽模具宽度;硫化时适当增加压力,一般增加2.5-3mpa左右;硫化时传送带的拉伸不宜过大,以1%-2%为宜,视帆布的热收缩率而定。
  The width of the conveyor belt should be less than the width of the finished product, and try to keep it about 99% of the width of the finished product, and the mold width should be properly relaxed when curing; When vulcanization, increase the pressure appropriately, generally increase about 2.5-3mpa; When vulcanizing, the stretching of the conveyor belt should not be too large, 1%-2% is appropriate, depending on the heat shrinkage of the canvas.
  作为传送带,粘合剂的厚度比普通传送带稍厚,既可以防止出现质量缺陷,又可以增加层间的粘合力,特别是在高温运行的EP芯带,如果EP帆布胶合厚度不够,在操作过程中容易造成胶与布或布与布脱层,但尼龙芯和帆布芯由于芯层硬度和柔软度较低,很少出现。
  As conveyor belt, the thickness of the adhesive is a little thick than ordinary conveyor belt, can prevent quality defects, and can increase the bonding strength between the layers, especially in high temperature operation of EP core zone, if the EP canvas agglutination thickness is not enough, easy to cause gum in the process of operation and cloth or cloth and cloth layer, but the godson and canvas core due to the low core layer hardness and softness, rarely appears.
  山东传送带经常出现磨损、划伤、破损、搭接部位开裂等问题,这些设备问题的出现不仅加快了传送带的损坏,而且造成物料的漏撒和浪费,通常出现传送带设备问题以后,企业都是通过缝补、加热硫化或者报废更新,这些方式都不能很好的解决设备问题,具体且有效的解决方法还是要去实践,毕竟实践出真理!
  Shandong conveyor belt often appear wear, scratch, breakage, overlapping parts of the problem such as craze, problems arose with these devices not only accelerated the damage of the conveyor belt, and the cause of material leakage and waste, usually after the conveyor equipment problems, enterprise by sewing, heating vulcanization or scrapped, the method can well solve the problem of equipment, The concrete and effective solution is to practice, after all, practice leads to truth!
  此外,如何选择传送带也是一大解决方案,采购时要准确说明具体材料的名称和性质,特别是粒度、温度、是否有酸、碱等腐蚀性及特殊要求;指定具体应用,所需规格(宽度、长度、层数、厚度等),特别是耐热传送带的使用温度和体积。
  In addition, how to choose the conveyor belt is also a major solution, procurement to accurately describe the name and nature of the specific material, especially particle size, temperature, whether there is acid, alkali and other corrosive and special requirements; Specify the specifications (width, length, number of layers, thickness, etc.) required for the specific application, especially the temperature and volume of the heat-resistant conveyor belt.
  传送带出现纵向水波纹问题如何解决?以上便是问题的解答了,而且在此我们还讲解了传送带其他方面的内容,希望能够给您好的帮助,如果您想选购传送带进行工作的话,可以先来网站www.huafengxiangsu.com看看相关咨询,了解了解相关的问题。
  How to solve the longitudinal water ripple problem in the conveyor belt? The above is the answer to the problem, and here we also explain the conveyor belt other aspects of the content, I hope to give you good help, if you want to buy conveyor belt to work, you can first come to the website www.huafengxiangsu.com to see the relevant consultation, understand the relevant problems.
上一篇:食品级输送带在食品行业的应用
下一篇:山东输送带使用之前要进行严格的检查!

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区