First, friction roller, scraping device and belt conveyor are added at the turning roller. The scraping device is added at the change direction roller along the conveyor belt to eliminate the problem of material sticking at the change direction roller. The change direction roller can solve the problem of local damage of conveyor belt caused by the material sticking on the roller, and the unloading truck can be replaced.

图片

picture

第二、输送机任凹过渡处的爪带轮,胶带输送机。实践证实，钢绳式橡胶输送带横向强度不足，启动时，斥带轮造成橡胶输送带局部受力过大，导致撕裂橡胶输送带，将乐带轮伞部改为乐带滚筒，可彻底解决这一问题。

Second, any concave transition of the conveyor claw pulley, belt conveyor. The practice has proved that the transverse strength of the steel rope type rubber conveyor belt is insufficient. When starting, the repulsion pulley causes the rubber conveyor belt to bear too much force locally, leading to tearing the rubber conveyor belt. Changing the umbrella part of the belt pulley to the belt pulley can completely solve this problem.

第三、输送机，胶带输送机输送机头、尾及中间转载过渡处的改进:输送机头、尾及中间转载处的过渡长度及过渡方式，对橡胶输送带的使用寿命影响很大。须进行合理的过渡设计，心尽量减轻橡胶输送带胶而的瞎损，确保不出现橡胶输送带的折番、中间凸起现象,传动滚筒，落料处不卅现物料撒漏,槽形托辊。

Third, conveyor, belt conveyor, conveyor head, tail and intermediate transfer transition improvement: conveyor head, tail and intermediate transfer transition length and transition mode, have a great impact on the service life of rubber conveyor belt. Reasonable transition design should be carried out to minimize the blind damage of rubber conveyor belt, to ensure that there is no double fold and bulge in the middle of rubber conveyor belt, there is no material leakage at the driving drum and blanking place, and there is no trough idler.

图片

picture

第四、皮带输送机输送机任凹过渡处的爪带轮。实践证实,移动式输送机，尼龙输送带横向强度不足,缓冲托辊，启动时，斥带轮造成输送带局部受力过大,传动滚筒，导致撕裂输送带，将乐带轮伞部改为乐带滚筒,包胶滚筒，可彻底解决这个问题。

Fourth, the claw pulley at any concave transition of belt conveyor. Practice has proved that the mobile conveyor, nylon conveyor belt transverse strength is insufficient, buffer idler, start, repulsion pulley cause conveyor belt local stress is too large, drive drum, lead to tear conveyor belt, change the belt pulley umbrella part into belt roller, rubber coated roller, can completely solve this problem.

今天的精彩内容由切菜机输送带提供，真诚为您提供满意的服务，如果您有疑问或者是问题请欢迎来电咨询，或者是进入我们的网址：https://www.huafengxiangsu.com

Today's wonderful content is provided by the chopper conveyor belt. We sincerely provide you with satisfactory service. If you have any questions or questions, please call us or enter our website: https://www.huafengxiangsu.com