1. Choose the belt with the same type as your own machine and can match the tooth saw.

2、输送带厂家主张，在花纹PVC输送带轮上设备新的皮带，不能用工具直接撬跟吸湿皮带。

2. Conveyor belt manufacturers advocate that new belts should be installed on patterned PVC conveyor pulley instead of directly prying the belt with tools.

3、拆开包装查看皮带概括是不是有裂缝，发现有裂缝则为废品。

3. Open the package to check whether there are cracks on the belt. If cracks are found, they are waste products.

4、调紧机械设备的基地距，运用张力测量仪测验皮带张力的细。

4. Adjust the base distance of mechanical equipment and test the belt tension with tension measuring instrument.

5、查看别的的机械装备，看是不是跟皮带相对称及油脂是不是增加的。

5. Check other mechanical equipment to see if it is proportional to the belt and if the grease is increased.

6、要拧紧机械的安装螺栓，方正扭矩。由于机械设备在运作时基地距的改变都会导致皮带及配件的功用不运用。

6. To tighten the mounting bolts of the machine, square the torque. Due to the change of base distance in the operation of mechanical equipment, the function of belt and accessories will not be used.

7、假如摸上去觉得太热，可能是花纹PVC输送带太过于紧，或是轴承不对称，或光滑不正确。

7. If feel too hot, may be pattern PVC conveyor belt too tight, or bearing asymmetry, or smooth incorrect.

花纹PVC输送带轮在运用过程中需求长时间保持其完好的结构，所以它能够一向正常工作。在保持其完好结构方面，产品本身需求具有杰出的强度，以使其不简单被外部损坏，从而实现长时间运用。

Pattern PVC conveyor pulley needs to keep its intact structure for a long time in the process of application, so it can always work normally. In terms of maintaining its good structure, the product itself needs outstanding strength, so that it is not simply damaged by the outside, so as to achieve long-term use.

挑选正时皮带时，应该首要考虑机械适应性。凸粒状斑纹适用于软包装物或需有抓着力的物料输送或无滑动输送。带面上有高出带体或凹嵌入带体的粒状斑纹，也可将凹坑制成方孔形或棱形和布纹形。

When selecting timing belt, the first consideration should be mechanical adaptability. It is suitable for conveying soft packing materials or materials that need to be grasped or without sliding. On the surface of the belt, there are granular speckles which are higher than the belt body or concave embedded in the belt body, and the pits can also be made into square hole shape, prismatic shape and cloth pattern shape.

同步带轮选用多头滚刀，在大进给且条件下，受到插齿机刀具往复运动机构的约束。近在开发选用刀具卸载，运用静承，增强刀架与立柱刚性等新结构后，功率有明显提高。

The synchronous belt pulley is a multi head hob, which is constrained by the reciprocating mechanism of the cutter of gear shaper under the condition of large feed. In recent years, after the development of new structures such as tool unloading, hydrostatic bearing and strengthening the rigidity of tool holder and column, the power has been significantly improved.