输送机是一种，通用的连续运输设备，用作支撑部件，输送力通过静摩擦实现，当然使用期间也会出现一些问题，比如偏差方面，那么输送带本身使用会引起怎样的偏差？

　　Conveyor is a kind of efficient, universal continuous transport equipment, used as a support component, conveying force through static friction, of course, there will be some problems during the use, such as deviation, then the use of the conveyor belt itself will cause what kind of deviation?

　　输送带本身的芯层中间，特别是钢丝绳芯输送带的中间力不均匀，双向钢丝绳的不均匀力不可避免地导致输送带的偏斜。输送带不规范，制成蛇形会引起偏差。输送带接头的质量保证应保证其抗拉强度。相反，应确保接头的切割边缘垂直于传送带的线，以使接头后的环形带长度改变，否则会导致传送带偏离。

　　In the middle of the core layer of the conveyor belt itself, especially the middle force of the steel wire rope core conveyor belt is not uniform. The uneven force of the two-way steel wire rope inevitably leads to the deflection of the conveyor belt. Conveyor belt is not standard, made into a snake will cause deviation. The quality assurance of the conveyor belt joint shall ensure its tensile strength. Instead, ensure that the cut edge of the joint is perpendicular to the centerline of the conveyor belt so that the length of the ring behind the joint changes, otherwise the conveyor belt will deviate.

　　安装引起的偏差也不能忽略，比如头和尾辊螺丝不垂直于输送机的初始线，这会导致输送带的双向张力有所不同。滚筒支架不垂直于输送机的初始线。带槽托辊组的轴向倾斜辊的槽角不相等。滚筒支架的安装倾斜，从而使输送机的滚筒支架不在同一水平线上，从而导致输送带上的物料未对准并导致传送带偏离。

　　Deviations caused by installation can not be ignored, such as head and tail roller screws are not perpendicular to the initial center line of the conveyor, which will lead to different bidirectional tension of the conveyor belt. The drum support is not perpendicular to the initial center line of the conveyor. The grooves of the axial tilting rollers with grooves are not equal. The installation of roller bracket is tilted, so that the roller bracket of the conveyor is not on the same level, which leads to the material on the conveyor belt is not aligned and leads to the deviation of the conveyor belt.

　　山东输送带厂家提醒大家，环境造成的偏差同样要多注意，安装在露天的输送机，尤其是越野长途皮带输送机，会受到天气变化的影响，例如风，雨和雪，这也会导致输送带偏离。

　　Shandong conveyor belt manufacturers remind you that the deviation caused by the environment should also pay more attention to the installation of the conveyor in the open air, especially the cross-country long-distance belt conveyor, will be affected by weather changes, such as wind, rain and snow, which will also lead to conveyor belt deviation.

　　输送带出现偏差还是比较常见的故障，这导致设备的输送效率降低，应尽可能避免这一问题的出现。更多问题的详情您可以来网站www.huafengxiangsu.com看看资讯！

　　Conveyor belt deviation is still a common fault, which leads to the reduction of the transmission efficiency of equipment, and this problem should be avoided as far as possible. For more information about the problem, please visit www.huafengxiangsu.com!