如今输送设备得到了广泛的使用，作为输送设备上重要部件之一的输送带也随之崛起。那么　有的客户会问输送带的硬度是否重要，下面山东输送带厂家讲解输送带硬度是否重要。

　　Now conveying equipment has been widely used, as one of the important parts of conveying equipment conveyor belt also rise. So some customers will ask whether the hardness of the conveyor belt is important. The following Shandong conveyor belt manufacturer explains whether the hardness of the conveyor belt is important.

　　输送带的硬度与磨损程度有关。普通硬度在50到70之间。那么，硬度是不是越硬越好呢？显然不是，应根据胶带的要求和所输送的物料来确定。

　　The hardness of conveyor belt is related to the degree of wear. Ordinary hardness is between 50 and 70. So, is the hardness the harder the better? Obviously not, should be determined according to the requirements of tape and conveying materials.

　　如果要输送的物料是石头、沙子、煤、硬质材料等，就需要更好的更硬的材料，因为硬度更高，使用寿命更长，耐磨性更强。如果是耐温材料，有尖角，就需要软一些，可以缓冲对胶带的冲击。柔软意味着更好的热胀冷缩性能，使用寿命更长。输送带损坏对输送带的运行有诸多不利影响，甚造成人身伤害。

　　If the material to transport is stone, sand, coal, hard materials, etc., you need better and harder materials, because the hardness is higher, the service life is longer, the wear resistance is stronger. If it's a heat-resistant material with sharp corners, it needs to be soft to cushion the impact of the tape. Softness means better thermal expansion and contraction and longer service life. Conveyor belt damage has many adverse effects on the safe operation of conveyor belt, and even causes personal injury.

　　为了防止这种情况发生，山东输送带厂家提醒大家平时要做好输送带损坏的预防措施，比如：

　　In order to prevent this situation, the conveyor belt manufacturer reminds us to do a good job of conveyor belt damage prevention measures at ordinary times, such as:

　　将煤机出料口改为出料斗，增加缓冲，倾斜一定角度，不于直接撞击输送带。操作人员可以独立操作，并在正式上岗前经过培训。让检验人员和维修人员仔细检查，及时更换即将断裂或转动不灵活的托辊，认真研究调偏方法，及时更换不良托辊。

　　The discharging port of the coal machine is changed into a hopper to increase the buffer and tilt at a certain Angle so as not to directly impact the conveyor belt. Operators can operate independently and are trained prior to formal work. Let the inspection personnel and maintenance personnel carefully check, timely replacement is about to break or rotation is not flexible roller, carefully study the deviation method, timely replacement of bad roller.

　　为防止矸石卡住或掉落在托辊和回程输送带之间，在所有落煤位置加长导槽和输送带。在滚轮架上焊接几个支架进行加固，每个焊接口都进行了修复以提高滚轮架的强度，并在滚轮架的安装槽上方增加了吊耳钩。托辊固定，防止托辊掉落。

　　In order to prevent gangue from getting stuck or falling between the idler and the return conveyor belt, the guide groove and conveyor belt are lengthened at all coal falling locations. Several brackets were welded on the roller frame for reinforcement, and each welding joint was repaired to improve the strength of the roller frame, and lug hooks were added above the mounting groove of the roller frame. Roller is fixed to prevent roller from falling.

　　大块煤矸石不能上输送带，应加强采煤工作面管理。在使用过程中，托辊不会被砸坏，托辊架也不会被损坏，有效保护了输送带。山东输送带厂家认为应该在所有输送带凹陷处的每个托辊上增加2个托辊，以减小托辊跨度，增加托辊密度，使输煤带不落入凹陷处。

　　Large coal gangue can not be conveyor belt, should strengthen the management of mining face. In the process of use, the roller will not be broken, the roller frame will not be damaged, effectively protect the conveyor belt. Shandong conveyor belt manufacturers believe that 2 idlers should be added to each idler in the depressions of all conveyor belts to reduce the span of idlers and increase the density of idlers so that the coal conveyor belt does not fall into the depressions.

　　山东输送带厂家提醒，如果想更好的更长久的使用输送带，就要在平常使用中加强对装置的维护以及保养工作，当然检查工作也不能拉下。更多内容就来网站www.huafengxiangsu.com咨询吧。

　　Shandong conveyor belt manufacturers remind, if you want to better and longer use of the conveyor belt, it is necessary to strengthen the maintenance and maintenance of the device in ordinary use, of course, the inspection work can not be pulled down. For more information, visit www.huafengxiangsu.com.