We all know that the conveyor belt on the conveyor is in a ring structure, but the conveyor belt sold from the manufacturer is usually not in a ring structure. If we want to use the conveyor belt normally, we need to bond the conveyor belt. Therefore, the quality of the joint of steel wire rope conveyor belt is very important for the use of subsequent conveyor belt. A good joint of steel wire rope conveyor belt can extend the life of the conveyor belt and ensure the smooth operation during the operation. Now let's introduce the following tips for installing the connector.

1、安装接头的方法有很多种，常用的方法有机械接头、冷粘接头以及热硫化接头。通常来说，机械接头是使用皮带式的扣接头，这样的接头对于安装来说方便、快捷，但是缺点是它的效率相较于其他接头来说比较底，而且还容易被损坏。虽然有些缺点，但是机械接头还是很多人使用的，一般8级带以下的输送带都会采用这种接头来连接。

1. There are many ways to install joints. The common methods are mechanical joints, cold bonded joints and hot vulcanized joints. Generally speaking, the mechanical joint is a belt type buckle joint, which is convenient and fast for installation, but its disadvantage is that its efficiency is lower than other joints, and it is easy to be damaged. Although there are some disadvantages, mechanical joints are still used by many people. Generally, the conveyor belt below grade 8 belt will be connected with such joints.

2、还有一种接头是冷粘接头，它的原理是用冷粘粘合剂来粘接，这样子的方法相较于上面提到的机械接头效率会更高，但是没有那么的经济实惠，而且它所要求的工艺条件难度较高，对于粘合剂的要求也很高，使用的实际情况不是很稳定。相较于冷粘接头，热硫化接头是目前看来实际使用情况更理想的一种方法，它同时具备了率、高稳定、长寿命、易操作等多种优点，其缺点则是操作工艺复杂度高、成本高、操作时间较长等。

2. Another kind of joint is cold adhesive joint. Its principle is to use cold adhesive to bond. Compared with the mechanical joint mentioned above, this method will be more efficient, but it is not so economical and affordable. Moreover, the process conditions it requires are more difficult, the requirements for adhesive are also very high, and the actual situation of use is not very stable. Compared with the cold bonded joint, the hot vulcanized joint is the most ideal method in actual use at present. It has many advantages such as high efficiency, high stability, long life and easy operation. Its disadvantages are high complexity of operation process, high cost and long operation time.

3、粘接钢丝绳输送带并不一定只能使用一种方法，一条完整的环形输送带也不一定只有一个接头，可以根据需要来采取不同的接头方法来粘接，一般冷粘接头和热硫化接头用的是阶梯式结构的接头方法。以上所说的方法是分层输送带的接头的安装方法。

3. It is not necessary to use only one method to bond the steel wire rope conveyor belt. A complete circular conveyor belt does not have only one joint. Different joint methods can be adopted to bond according to the needs. Generally, the joint method of ladder structure is used for cold bonding joint and hot vulcanization joint. The method described above is the installation method of the joint of the layered conveyor belt.

4、不同的输送带有不同的安装接头方法，而比较难安装接头的输送带是pvc和pvg整芯阻燃输送带。因为这种输送带的结构比较特殊，安装的难度有点高。8级以下的安装主要是采用机械接头，而8级以上的输送带，为了保证输送带的使用效果，还是多使用热硫化的接头方式，要注意的是，这种接头的结构都是指状的，这样能够更好的连接接头。

4. Different conveyor belts have different installation methods of joints, but the conveyor belts that are difficult to install joints are PVC and PVC whole core flame-retardant conveyor belts. Because of the special structure of the conveyor belt, the installation is a little difficult. Mechanical joints are mainly used for the installation below grade 8, while for the conveyor belt above grade 8, in order to ensure the use effect of the conveyor belt, the hot vulcanization joint mode is often used. It should be noted that the structure of this joint is finger shaped, so that the joint can be better connected.

以上就是对于钢丝绳输送带接头的简单的介绍，要想保证输送带的正常运行，接头是非常重要的一环，在连接接头的时候千万不能掉以轻心。

The above is a brief introduction to the joint of the steel wire rope conveyor belt. To ensure the normal operation of the conveyor belt, the joint is a very important part. When connecting the joint, you must not take it lightly.