The nylon conveyor belt will break because of wear and tear after using for a period of time. At this time, nylon conveyor belt should be bonded. But in practical application, the bonding effect is not ideal, which brings troubles to many enterprises. This chapter is to analyze the factors that influence the bonding effect of conveyor belt manufacturers.

　　1、溶剂挥发率:一般来说，挥发越快，初粘性越大，初粘性强度越高。

　　1. Solvent volatilization rate: Generally speaking, the faster volatilization, the greater the initial viscosity, the higher the initial viscosity strength.

　　2. 温度:一般来说，温度越高，固化速度越快，固化程度越高，粘结强度越大。

　　2. Temperature: Generally speaking, the higher the temperature, the faster the curing speed, the higher the degree of curing, the greater the bond strength.

　　3.湿度:一般来说，湿度越大，固化越慢，固化程度越差，粘结强度越小。

　　3. Humidity: Generally speaking, the higher the humidity, the slower the curing, the worse the curing degree and the smaller the bonding strength.

　　4. 粘接剂界面清洗干燥程度:粘接剂溶液越清洁干燥，织物越饱和，粘结力越强。

　　4. Degree of interface cleaning and drying: The cleaner the adhesive solution is, the more saturated the fabric is, the stronger the bonding force is.

　　5、施加在搭接表面的压力:压力越大，越均匀，粘接继电器越强

　　5. Pressure applied to overlap surface: The greater the pressure, the more uniform the relay is, the stronger the bonding relay is.

　　6. 搭接接头之间的粘接程度:粘接越紧密，粘接越强。

　　6. Degree of bonding between lap joints: The closer the bonding is, the stronger the bonding is.

　　通过输送带厂家为大家分析什么因素会影响尼龙输送带的粘接效果你知道吗?我希望我们的介绍能帮助你更好的生活。

　　Through the conveyor belt manufacturers for you to analyze what factors will affect the bonding effect of nylon conveyor belt, you know? I hope our introduction can help you better life.