We all know that conveyor belts can not be connected to use, connecting conveyor belts can be used, but some people in a shorter period of time when the conveyor belt will crack, or fracture, generally occurs in the joint. Why is that?

　　由于输送带接头的强度通常比带体接头的强度弱，同时，由于接头方法的不同，接头的强度也不同。

　　Because the strength of conveyor belt joints is usually weaker than that of belt body joints, and because of different joint methods, the strength of joints is also different.

　　一般机械接头，接头强度较低，只能达到人体强度的40%~50%，而冷液则稍好一些，接头强度可以达到60%~70%，好是热熔接头，接头强度可以达到80%~90%。(PVC、PU输送带不能使用冷胶)。

　　Generally mechanical joints have low strength, which can only reach 40%-50% of the strength of human body, while cold liquid is slightly better. The strength of joints can reach 60%-70%, preferably hot-melt joints. The strength of joints can reach 80%-90%. (PVC, PU conveyor belt can not use cold glue).

　　为了达到好的联合力量,热熔方法通常被用来使皮带,但是因为它是直接做成带,所以有时在安装,它不方便,安装一些设备可能不是,在这种情况下,很多人会选择使用机械关节,安装方便。所以选择您自己的连接器。

　　In order to achieve the best joint strength, the hot melt method is usually used to make the belt, but because it is directly made into the belt, sometimes it is inconvenient to install, install some equipment may not be, in this case, many people will choose to use mechanical joints, easy to install. So choose your own connector.

　　当然，如果您因为设备或其他原因不能使用现成的带，但又不想使用机械连接器，明诚还提供现场服务帮助您现场连接!

　　Of course, if you can't use the ready-made tape because of equipment or other reasons, but don't want to use mechanical connectors, sincerely provide on-site services to help you connect on-site!