耐高温输送带的组成是不可缺少的经济物资运输，广泛应用于运输行业。它可以运输散装物料、块状物料、包装箱等，但在带式输送机械的运输过程中，经常会出现物料疏松等问题。散装材料主要是分散在三个部分,分别为:传送带转运站的传送带,传送带的空心部分的带悬挂的腰带,耐热输送带在下滑的时候,下面我们介绍如何处理耐高温输送带的问题:
The composition of high temperature resistant conveyor belt is an indispensable economic material transportation, which is widely used in transportation industry. It can transport bulk materials, bulk materials, packing boxes, etc., but in the process of transportation of belt conveyor, there are often problems such as material looseness. The bulk materials are mainly distributed in three parts: the conveyor belt of the conveyor belt transfer station, the belt hanging from the hollow part of the conveyor belt, and the heat-resistant conveyor belt when sliding. Here we introduce how to deal with the problem of the heat-resistant conveyor belt:
1. 耐高温输送带点及转载材料:点和转载材料主要是因为皮带输送机械料斗、进料槽等处的位置,如果负载过重,输送机械将裙子,耐热输送带的损坏的现象,为了避免上述情况的发生,我们建议可以调整在耐热输送带的控制量,加强对于输送机械和耐高温输送带,维修和维护。
1. High temperature resistant conveyor belt point and transfer material: the point and transfer material are mainly due to the position of the hopper and feed chute of the belt conveying machinery. If the load is too heavy, the conveying machinery will damage the skirt and the heat-resistant conveyor belt. In order to avoid the above situation, we suggest that the control quantity of the heat-resistant conveyor belt can be adjusted to strengthen the control of the conveying machinery and the heat-resistant conveyor belt, Repair and maintenance.
2. 耐高温输送带凹部分悬浮物质:这是由于凹部分可以带挂起状态,时间吃很容易会变成槽耐热输送带,一旦输送机械的坡口角度,将很容易使材料在输送机械,一般冗余小传送带时选择将材料容易发生散射现象。
2. Suspended substance in concave part of high temperature resistant conveyor belt: This is because concave part can be suspended, and time eating can easily become groove heat-resistant conveyor belt. Once the groove angle of conveyor machine, it is easy to make the material in the conveyor machine. Generally, when redundant small conveyor belt is selected, the material is easy to scatter.
3.耐高温输送带打滑现象:当发生打滑时，主要是由于输送带在运行过程中两侧边缘高度发生变化，一侧高，另一侧低。物料会从低处滑落，以免溢出，处理的方法是调整物料滑落。
3. Slip phenomenon of high temperature resistant conveyor belt: when slip occurs, it is mainly due to the change of edge height on both sides of the conveyor belt during operation, with one side high and the other side low. The material will slide down from the low place to avoid overflow. The treatment method is to adjust the material slide.
The above is sorted out and released by the manufacturer of high angle conveyor belt. For more information, please click the official website for consultation: https://www.huafengxiangsu.com
联系微信