When using the conveyor belt with large inclination angle, friction will occur in all parts of the conveyor belt. Friction resistance can ensure that the service life of conveyor belt is within the normal range. However, if the friction between the conveyor belt and other parts increases, the conveyor belt will wear and tear, leading to the early abandonment of the conveyor belt and low long-term service life. In the operation process, which parts of the conveyor belt will produce friction? Below is a detailed understanding of the conveyor belt manufacturers.

　　1. 机架与输送带之间的摩擦。有时，由于输送带的制造、安装和使用过程中产生的缺陷，输送带可能会发生偏离。

　　1. Friction between frame and conveyor belt. Sometimes, due to defects in the manufacture, installation and use of conveyor belts, conveyor belts may deviate.

　　2. 导槽挡板与输送带之间的摩擦。输送带上的挡板磨损是一种特殊的磨损形式。

　　2. Friction between guide baffle and conveyor belt. Baffle wear on conveyor belt is a special form of wear.

　　3.支持辊和传送带之间的摩擦,和较低的覆盖胶的传送带也应该受到摩擦的定心支撑辊和向前倾斜槽支撑辊,和穿生成过渡段的槽支撑辊的辊的凸弯曲输送机。

　　3. The friction between the support roll and the conveyor belt, and the conveyor belt with lower rubber cover should also be subject to friction between the centring support roll and the forward inclined groove support roll, and the convex bending conveyor of the roll passing through the groove support roll which generates the transition section.

　　4、清洁工和摩擦传送带,传送带的清洁工是通常穿制服,但硬钢板作为一个干净的盘子,如果使用不当,也会减少橡胶除污垢,当清洁工之间的异物,指出和传送带,也可以画在传送带长度深深的伤痕。

　　4. Cleaners and friction conveyor belts, conveyor belt cleaners usually wear uniforms, but hard steel plate as a clean plate, if used improperly, will also reduce rubber dirt removal. When foreign bodies between cleaners, pointing out and conveyor belt, can also be painted in the conveyor belt length deep scars.

　　以上就是输送带在运行过程中摩擦的主要部分，希望本文能给您一些了解。在使用中，需要保证输送带与各部件之间的摩擦符合规范，从而保证输送带的工作效率和使用寿命，从而降低企业的生产成本。有关输送带的更多信息，请关注我们的网站继续了解:https://www.huafengxiangsu.com

　　Above is the main part of friction of conveyor belt in operation. I hope this article can give you some understanding. In use, it is necessary to ensure that the friction between the conveyor belt and its components conforms to the specifications, so as to ensure the working efficiency and service life of the conveyor belt, so as to reduce the production cost of enterprises. For more information on conveyor belts, please follow our website and continue to learn: https://www.huafengxiangsu.com