0531-83510047
13791000079

大家都在搜: 食品级输送带 大倾角输送带 切菜机输送带

当前位置: 首页 - 新闻中心 > 公司新闻 > 公司新闻

带式输送机的安全操作注意点

来源:http://www.huafengxiangsu.com 时间:2019-03-05 15:53:40 浏览次数:
1运送机在正常工作条件下应具有满足的稳定性和强度。
1. The conveyor should have satisfied stability and strength under normal working conditions.
2电气装置的规划与装置有必要符合GB4064和GBJ232的规定。
It is necessary for the planning and installation of electrical devices to comply with the requirements of GB4064 and GBJ23 2.
3未经规划或制作单位同意,用户不该进行影响运送机原规划、制作、装置安全要求的变化。
Without the consent of the planning or production unit, the user should not change the safety requirements of the original planning, production and installation of the conveyor.
4运送机有必要按物料特性与运送量要求选用,不得超载运用,有必要避免堵塞和溢料,保持运送畅通。
4. It is necessary to select the conveyor according to the material characteristics and transportation requirements. It is not allowed to be overloaded. It is necessary to avoid blockage and spills and to maintain smooth transportation.
a.运送带应有适合特定的载荷和运送物料特性的满足宽度;
食品级输送带
A. The conveyor belt shall have a suitable width for specific loads and material characteristics;
b.运送机倾角有必要规划成能避免物料在正常工作条件下打滑或滚落;
B. It is necessary to plan the inclination angle of the conveyor so as to avoid material slipping or rolling under normal working conditions.
c.运送机应设置保证均匀给料的操控装置;
C. The conveyor should be equipped with a control device to ensure uniform feeding.
d.料斗或溜槽壁的坡度、卸料口的方位和尺寸有必要能保证物料靠自身重力自动地流出;
D. The gradient of hopper or chute wall, the direction and size of discharge port are necessary to ensure that the material flows out automatically by its own gravity.
e.受料点应设在水平段,并设置导料板。受料点有必要设在歪斜段时,需设辅佐装料设施;
E. The receiving point should be located in the horizontal section and the guide plate should be set. When it is necessary to set up the feeding point in the skewed section, auxiliary feeding facilities should be set up.
f.笔直拉紧装置区段应装设落料挡板。
F. Blanking baffles shall be installed in the straight tensioning device section.
g .受料点宜采纳下降冲击力的办法。
G. The method of reducing impact force should be adopted at the receiving point.
5、物料有粘性时运送机的滚筒表面、回程段带面应设置相应的清扫装置。运送带的歪斜段尾部滚筒前好设置挡料板,这样就可以避免运送带跑偏。
5. When the material is sticky, the surface of the drum and the belt surface of the return section of the conveyor should be equipped with corresponding cleaning devices. It is better to set up a baffle in front of the tail drum of the deviated section of the conveyor belt, so as to avoid the deviation of the conveyor belt.
以上的精彩内容有食品级输送带http://www.huafengxiangsu.com提供技术支持,我们的网站上会继续为打击呈现很多的新鲜资讯,请记得关注我们!
The above highlights include the technical support provided by food-grade conveyor belt http://www.huafengxiangsu.com. Our website will continue to present a lot of fresh information for the crackdown. Please remember to pay attention to us!

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13791000079(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区