0531-83510047
13964193999

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带定做 橡胶输送带生产厂家

当前位置: 首页 - 新闻中心 > 公司新闻 > 公司新闻

移动式输送带打滑的问题怎么解决?

来源:http://www.huafengxiangsu.com 时间:2021-01-31 16:34:00 浏览次数:
1.初张力太小:输送带离开滚筒处的张力不够造成输送带打滑;这种情况一般发生在启动时,解决的办法是调整拉紧装置,加大初张力;
1. The initial tension is too small: the tension at the place where the conveyor belt leaves the drum is not enough, which causes the conveyor belt to slip; this kind of situation generally occurs when starting, and the solution is to adjust the tension device and increase the initial tension;
2.传动滚筒与输送带之间的摩擦力不够造成打滑,其主要原因多半是输送带上有水或环境潮湿,解决办法是在滚筒上加些松香末,但要注意不要用手投加,而应用鼓风设备吹入,以免发生人身事故;
2. The friction between the driving roller and the conveyor belt is not enough, which causes the slip. The main reason is that there is water on the conveyor belt or the environment is humid. The solution is to add some rosin powder on the roller, but pay attention not to add it by hand, but to use the blower equipment to blow in, so as to avoid personal accidents;
山东输送带批发
3.尾部滚筒轴承损坏不转或上下托辊轴承损坏不转的太多,造成损坏的原因是机尾浮沉太多,没有及时检修和更换已经损坏或转动不灵活的部件,使阻力增大造成打滑;
3. The tail roller bearing is damaged and does not rotate or the upper and lower idler bearings are damaged and does not rotate too much. The reason for the damage is that there are too many floats and sinks at the tail, and the damaged or inflexible rotating parts are not repaired and replaced in time, which increases the resistance and causes slipping;
4.启动速度太快也能形成打滑,此时可慢速启动。如使用鼠笼电机,可点动两次后再启动,也能有效克服打滑现象;
4. If the starting speed is too fast, it can also cause slippage. At this time, it can start slowly. If the squirrel cage motor is used, it can be inched twice and then started, which can also effectively overcome the slip phenomenon;
5.输送带的负荷过大,超过电机能力也会打滑,此时打滑有利的一面是对电机起到了保护作用。否则时间长了电机将被烧毁。但对于运行来说则是打滑事故。
5. If the load of the conveyor belt is too large, it will slip even if it exceeds the capacity of the motor. At this time, the favorable side of the slip is that it has a protective effect on the motor. Otherwise, the motor will be burned after a long time. But for the operation, it is a slip accident.
以上就是山东输送带批发http://www.huafengxiangsu.com 为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The above is Shandong conveyor belt wholesale http://www.huafengxiangsu.com  Thank you for checking our company's information in your busy schedule. If you want to know more, you are welcome to inquire!
上一篇:耐热输送带的生产原料有哪几种?
下一篇:清洗橡胶输送带应该注意哪些?

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区