13964193999
0531-83510047

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 新闻中心 > 公司新闻 公司新闻

解决输送带沾料需要注意哪些事项?

来源:http://www.huafengxiangsu.com 时间:2020-12-08 16:30:46 浏览次数:0
一、使用皮带清扫器
1、 Use belt sweeper
皮带清扫器,可皮带表面的粘料,这种针对大的粘料有一定的效果,但是如果使用在细小的粘料上会清扫不彻底,且易刮伤皮带,同时还需增加设备投资费用和人工维护费用;
The belt sweeper can remove the sticky materials on the belt surface, which has certain effect on large sticky materials. However, if it is used on small sticky materials, it will not clean thoroughly, and it is easy to scratch the belt. At the same time, it also needs to increase the equipment investment cost and manual maintenance cost;
有利有弊,主要还是看使用场景来选择合适的方式
There are advantages and disadvantages, mainly depends on the use of scenarios to choose the appropriate way
二、选择合适不粘料的输送带。
2、 Choose suitable non stick material conveyor belt.
好的输送带自带物理清洁功能,可有效解决皮带粘料问题。如下图所示:
Good conveyor belt with physical cleaning function, can effectively solve the problem of belt sticking. As shown in the figure below:
防霉级输送带
Mould proof and antibacterial conveyor belt
采用食品级耐油输送带可有效防止粘料的问题,同时日常清洗保养也是方便快捷
The use of food grade oil resistant conveyor belt can effectively prevent the problem of sticking materials, and the daily cleaning and maintenance is also convenient and fast
食品级输送带
白色食品级输送带
White food conveyor belt
防霉输送带:主要用于对食品加工有较高要求的设备上,其特性是在日常使用可有效避免多次使用产生的微生物,易于打理。其次在生产过程中及时发现因输送带老话而导致的产品质量问题, 可及时更换
Mould proof and antibacterial conveyor belt: it is mainly used in the equipment with high requirements for food processing. Its characteristics are that it can effectively avoid microorganisms produced by repeated use in daily use, and it is easy to take care of. Secondly, in the production process, timely find the product quality problems caused by the old saying of conveyor belt, which can be replaced in time
食品级PU输送带:不易粘料,符合FDA认证检测,可直接接触食品生产加工,避免人工接触导致的二次污染,减少停机降低维护周期。
Food grade Pu conveyor belt: it is not easy to stick materials and meets the international FDA certification test. It can directly contact food production and processing, avoid secondary pollution caused by manual contact, reduce downtime and reduce maintenance cycle.
带式输送机输送的材料往往带有粘性物质,如面粉、巧克力、泥状物料,其中一部分会粘在输送带工作面上,在卸料时不能卸掉,粘着物料便进入空载段的下托辊上,把托辊弄脏并粘有这些附着物。如果粘着物进入机尾改向滚筒,就会粘在滚筒表面上,越粘越多,附着力也越来越大,结果是造成输送带跑偏,增加输送带磨损,酿成严重后果。
The materials transported by belt conveyor often contain sticky substances, such as flour, chocolate and muddy materials. Some of them will stick to the working face of the conveyor belt, which can not be unloaded during unloading. The adhesive materials will enter the lower idler of the no-load section, which will contaminate the idler and stick these attachments. If the adhesive enters the tail of the machine and changes to the drum, it will stick to the surface of the drum. The more the adhesion is, the greater the adhesion will be. As a result, the conveyor belt will deviate and wear, resulting in serious consequences.
所以在发现粘料是应及时分析原因,改进生产技术和工艺
Therefore, it is necessary to analyze the causes in time and improve the production technology and process
要想提高皮带输送机操作效率和效益,更重要的是保持皮带输送机的环境良好。
In order to improve the operation efficiency and efficiency of belt conveyor, the most important thing is to keep the environment of belt conveyor good.
以上是小编分享的食品级输送带,你还见过哪些新颖有趣的知识吗?,欢迎在点击网站的链接https://www.huafengxiangsu.com ,在留言中写下你要表达的内容.
The above is the food grade conveyor belt shared by Xiaobian. What new and interesting knowledge have you seen? , welcome to click on the website link https://www.huafengxiangsu.com  Write down what you want to say in the message
上一篇:输送带黏合剂要注意哪些方式?
下一篇:大倾角输送带主要应用在哪些地方?

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区