13964193999
0531-83510047

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 新闻中心 > 公司新闻 公司新闻

输送带在使用时为什么会出现打褶的现象?

来源:http://www.huafengxiangsu.com 时间:2019-10-22 16:29:47 浏览次数:0
  橡胶输送带广泛用于采矿,冶金,钢铁等行业。 作为传送带系统的重要组成部分,橡胶传送带的使用性能在传送效率方面起着关键作用。 许多用户反馈说,在使用橡胶传送带时会发生打褶。 为什么是这样? 传送带制造商将为您详细介绍。
  Rubber conveyor belt is widely used in mining, metallurgy, steel and other industries. As an important part of conveyor belt system, the performance of rubber conveyor belt plays a key role in the transmission efficiency. Many users have reported that pleats occur when rubber conveyor belts are used. Why is that? The belt manufacturer will give you a detailed introduction.
  橡胶输送带的皮带有时会弯曲弯曲,严重影响输送带的性能,不利于生产。 其原因如下:带材两侧的厚度不同,较厚的一侧容易拉长,长度不一致会导致弯曲。 带芯剥皮是不合理的。 胶带两侧不一致的组合会在拉伸时导致相同的力,并且张力不同,这不可避免地使传送带弯曲和弯曲。 拉伸夹具的角度控制不佳。 当它与主机不一致时,很容易拉动条带并形成弯曲和折叠的形状。
  The rubber conveyor belt is sometimes bent, which seriously affects the performance of the conveyor belt and is not conducive to safety production. The reasons are as follows: the thickness of the two sides of the strip is different, the thicker side is easy to elongate, and the inconsistent length will lead to bending. Core peeling is not reasonable. The inconsistent combination of the two sides of the tape will cause the same force when stretching, and the tension is different, which inevitably causes the conveyor belt to bend and bend. The angle control of the stretching fixture is poor. When it is inconsistent with the mainframe, it is easy to pull the strip and form a curved and folded shape.
大倾角输送带
  橡胶输送带的向前运行支撑和向前牵引力FQ,支撑和旋转力Fz和横向力FC的牵引力分解,托辊的侧向分量轴向运动,托辊支架固定的托辊不轴向移动,不可避免地会产生反作用 传送带上会产生力Fy,这会导致传送带向另一侧移动,从而引起偏差。 明确了支撑辊组安装过程中的偏转力,这就是为什么不难理解橡胶传送带的偏差,并且调整方法变得清晰的原因。
  ? the forward operation of rubber conveyor belt, the support and forward traction FQ, the support and rotation force FZ and the traction decomposition of transverse force FC, the axial movement of the lateral component of the idler, the idler fixed by the idler bracket does not move axially, inevitably will produce a reaction on the conveyor belt, which will cause the conveyor belt to move to the other side, resulting in deviation. The deflection force during the installation of the supporting roller group is clear, which is why it is not difficult to understand the deviation of the rubber conveyor belt and the adjustment method becomes clear.
  以上是橡胶输送带在使用过程中打褶的原因,希望对您有所帮助。 有关橡胶传送带的更多信息,请关注我们的网站。 如果您想购买传送带和滚筒产品,请致电我们。 我们将为您提供的产品和服务。
  The above is the reason why the rubber conveyor belt is pleated in use. I hope it can help you. For more information about rubber conveyor belts, please follow our website. If you want to buy Conveyor and roller products, please call us. We will provide you with high quality products and services.
上一篇:尼龙输送带和棉帆布输送带的区别!
下一篇:皮带输送机和给料机怎么配合工作?

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区