0531-83510047
13791000079

大家都在搜: 食品级输送带 大倾角输送带 切菜机输送带

当前位置: 首页 - 新闻中心 > 公司新闻 > 公司新闻

大倾角输送带在设计时要注意什么?

来源:http://www.huafengxiangsu.com 时间:2019-07-10 09:43:30 浏览次数:
  在大倾角带式输送机的设计计算中,首先要认真考虑主要参数的选择,因为它关系到系统功能的可靠实现和输送设备的安全生产。
  In the design and calculation of large inclined belt conveyor, the selection of main parameters should be considered carefully at first, because it is related to the reliable realization of system functions and the safe production of conveying equipment.
  1带速。胶带的速度不仅影响输送机的输送能力、驱动功率等性能指标,而且影响滚筒、输送带等部件的选择。对于大倾角带式输送机,带速的大小也影响物料输送的稳定性。下料部分,有一个相对速度差由于材料和输送带,高带速提供的摩擦可能无法克服材料本身的惯性力,使材料不能与传送带保持同步运行,导致材料不能运输。因此,不宜选择带式输送机带速高的输送带。
  1 band speed. The speed of belt not only affects the conveying capacity and driving power of conveyor, but also affects the selection of drum, conveyor belt and other components. For large inclined belt conveyor, the belt speed also affects the stability of material transportation. In the blanking part, there is a relative velocity difference between the material and the conveyor belt. The friction provided by the high belt speed may not overcome the inertia force of the material itself, so that the material can not run synchronously with the conveyor belt, leading to the material can not be transported. Therefore, it is not appropriate to choose belt conveyor with high belt speed.
  2模拟摩擦系数。仿真输送机的摩擦因数直接影响传动功率、胶带的强度、不回转矩等主要参数的确定。与普通带式输送机相比,用深沟辊组等装置计算额定工况时,应考虑模拟摩擦因数取较大值。在计算不回料工况时,模拟的摩擦因数与系统特性有关,应取较小的值。
大倾角输送带
  2. Simulate the friction coefficient. The friction factor of the simulated conveyor directly affects the determination of the main parameters such as transmission power, belt strength and non-rotating moment. Compared with ordinary belt conveyor, when calculating rated working conditions with deep groove rollers, it is necessary to consider the larger analog friction factor. When calculating the non-return working condition, the simulated friction factor is related to the system characteristics, and should be taken as a smaller value.
  3输送带安全系数。大倾角带式输送机和带材断裂事故,比卧式输送机损伤大得多。因此,输送带的安全系数应取较大的值。但安全系数不宜过高,因为取较大的安全系数,就意味着选择规格(强度)较高的输送带。输送带的强度越大,所需厚度越大,横向刚度越大,进槽越大越差,超过极限,不能保证输送带实现有效的夹紧材料。因此,当输送带因强度过大而无法按设计要求进入槽内时,有必要考虑其他措施,不仅要满足输送带强度的要求,还要满足开槽的要求。
  Safety factor of conveyor belt. The accident of large inclined belt conveyor and belt material rupture is much more serious than that of horizontal belt conveyor. Therefore, the safety factor of conveyor belt should take a larger value. However, the safety factor should not be too high, because taking a larger safety factor means choosing conveyor belts with higher specifications (strength). The greater the strength of the conveyor belt, the greater the thickness required, the greater the transverse stiffness, the worse the grooving, beyond the limit, can not guarantee the conveyor belt to achieve effective clamping materials. Therefore, when the conveyor belt is too strong to enter the tank according to the design requirements, it is necessary to consider other measures, not only to meet the requirements of conveyor belt strength, but also to meet the requirements of slotting.
  输送带下垂:输送带下垂越大,接近托辊组时输送带角度越大,物料越不稳定。
  Conveyor belt sag: The larger the conveyor belt sag, the larger the angle of conveyor belt when approaching the roller group, the more unstable the material is.
  更多有关大倾角输送带的相关信息可以点击我们的官网进行咨询:http://www.huafengxiangsu.com
  For more information on the steep inclined conveyor belt, please click on our website at http://www.huafengxiangsu.com.

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13791000079(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区