0531-83510047
13791000079

大家都在搜: 食品级输送带 大倾角输送带 切菜机输送带

当前位置: 首页 - 新闻中心 > 公司新闻 > 公司新闻

怎么防止尼龙输送带胶面损伤?

来源:http://www.huafengxiangsu.com 时间:2019-06-25 15:07:42 浏览次数:
  防止尼龙输送带胶面损伤的方法尼龙输送带具有强度高、耐冲击、开槽性好等特点,得到了人们的认可。如果经常使用,你会发现橡胶表面被损坏了,所以不能使用。所以在这种情况下,我们必须设法防止这种情况,有什么方法?
  Nylon conveyor belt has been recognized for its high strength, impact resistance and good grooving performance. If you use it regularly, you will find that the rubber surface is damaged, so it can not be used. So in this case, we must try to prevent this situation, what is the way?
  种方法是防止输送带受到很大的冲击。设计不同的煤炭运输系统的漏桶太大,是不合理指导煤流,还有很多大块材料系统中,所有这些导致输送带可以影响,形成更多的皮带表面的坑,损害橡胶表面。
  The first method is to prevent the conveyor belt from being greatly impacted. The leakage barrels of different coal transportation systems are too big to guide coal flow reasonably. There are also many large material systems. All of these lead to the influence of conveyor belt, forming more pits on the surface of belt and damaging the surface of rubber.
  第二种情况下,防止与高温材料接触。摘要尼龙输送带在运输锅炉房脏渣煤时,由于高温脏渣煤未完全冷却,使输送带罩胶化、熔化,加剧了输送带表面的异常磨损。此外,由于电焊、气割操作产生火花,炉渣也会对胶带罩胶造成损坏。
  In the second case, avoid contact with high temperature materials. When nylon conveyor belt transports dirty slag coal in boiler room, because the high temperature dirty slag coal is not completely cooled, the conveyor belt cover is gelatinized and melted, which aggravates the abnormal wear on the conveyor belt surface. In addition, due to the spark generated by welding and gas cutting operation, slag will also cause damage to the adhesive tape cover.
大倾角输送带
  第三个情况也是比较重要的,是输送带的质量。在尼龙输送带的制造过程中,由于橡胶材料的粘合力不足,在制造过程中出现缺陷或制造过程控制不严,摩擦力的反作用力使包覆胶逐渐脱落,导致包覆胶撕裂。
  The third situation is also more important, is the quality of the conveyor belt. In the manufacturing process of nylon conveyor belt, due to the insufficient adhesive force of rubber materials, defects occur in the manufacturing process or the manufacturing process is not strictly controlled. The reaction force of friction makes the coated rubber gradually fall off, leading to the tearing of the coated rubber.
  总之,防止尼龙输送带胶粘剂表面损坏,从生产到使用都要特别注意。对于质量,我们在购买时应该注意,去正规的厂家,可以减少这种情况。在使用过程中,注意治疗的细节,规范操作会减少这种情况。
  In short, special attention should be paid to the prevention of surface damage of nylon conveyor belt adhesives from production to use. As for quality, we should pay attention to it when purchasing. If we go to a regular manufacturer, we can reduce this situation. In the use process, pay attention to the details of treatment, standardized operation will reduce this situation.

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13791000079(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区