13964193999
0531-83510047

大家都在搜: 食品级输送带 切菜机输送带 流水输送带 同步带 橡胶输送带

当前位置: 首页 - 新闻中心 > 公司新闻 公司新闻

食品级尼龙输送带的日常维护保养方向

来源:http://www.huafengxiangsu.com 时间:2019-06-03 15:47:24 浏览次数:0
1、给料方向应顺胶带的运转方向,为减小物料下落时对胶带的冲击应采溜槽,减小物料下落间隔;胶带受料段应缩短托辊间距和采用缓冲托辊为漏料,带顺应采用柔软适度的挡料板,以免档料板过硬,刮破保送带的带面。
1. The feeding direction should follow the running direction of the belt. In order to reduce the impact on the belt when the material falls, chute should be adopted to reduce the falling interval of the material. The feeding section of the belt should shorten the distance between the idlers and adopt the buffer idler as the leaking material, and the belt should be complied with the use of soft and moderate baffle, so as not to make the baffle too hard and scrape the belt surface.
2、不同类型、规格层数的保送带不宜接在一同运用,其接头采用胶接法。
2. Different types and layers of belts are not suitable to be joined together, and their joints are bonded by gluing method.
3、保送胶带运转速度普通不宜大于2.5米/秒,块度大,磨损性大的物料和运用固定梨的卸料安装应尽量采用低速。
3. The running speed of the belts should not be more than 2.5 m/s. The materials with large fragmentation and abrasion and the unloading and installation of fixed pears should adopt low speed as far as possible.
4、保送带在运用中应留意以下事项:①防止托辊被物料掩盖,形成回转不灵,避免漏料卡于滚筒与胶带之间,留意活动局部的光滑,但不得油污保送胶带;②防止带负荷启动;③胶带发作跑偏,应用时采取措施纠正;④发现胶带部分损人造棉应用时修补,以免扩展;
食品级输送带
4. The following points should be noticed in the operation of the belt: 1. Prevent the rollers from being covered up by the materials, form malrotation, avoid leakage from sticking between the drum and the belt, pay attention to the smoothness of the moving parts, but do not get greasy belt; 2. Prevent the start-up of the belt load; 3. Take measures to correct the deviation of the belt when it is applied; 4. Repair the damaged part of the belt when it is used, so as to avoid expansion;
5、保送机的传动滚筒直径与保送带布层的关系、传动滚筒、改向滚筒的配套以及对托辊槽角的请求应依据运输机的设计规则,合理选取。
5. The relationship between the diameter of the driving drum and the layers of the belt, the matching of the driving drum and the reversing drum, and the request for the groove angle of the idler should be reasonably selected according to the design rules of the conveyor.
6、保送胶带的类型、构造、规格、层数应依据运用条件合理选用。
6. The type, structure, specifications and layers of the belts should be selected reasonably according to the operating conditions.
以上的精彩内容有食品级输送带https://www.huafengxiangsu.com提供技术支持,我们的网站上会继续为大家呈现很多的新鲜资讯,请记得关注我们!
The above wonderful content includes food-grade conveyor belt https://www.huafengxiangsu.com to provide technical support, our website will continue to present you a lot of fresh information, please remember to pay attention to us!
上一篇:食品级输送带的生产需要机械的适用上
下一篇:大倾角裙边输送带在输送上使用要考虑哪些因素?

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区