0531-83510047
13791000079

大家都在搜: 食品级输送带 大倾角输送带 切菜机输送带

当前位置: 首页 - 新闻中心 > 行业百科 > 行业百科

大倾角输送带发生掉皮现象怎么办?

来源:http://www.huafengxiangsu.com 时间:2019-07-11 16:20:09 浏览次数:
  我们知道的传送带在生产过程中由于摩擦大倾角下降和材料导致橡胶带表面,大倾角耐热输送带更容易出现这种情况,由于运输、高温材料受到高温的影响容易剥落,这一切发生的时候,会大大减少输送带的生活。下面我们来解释一下皮带脱皮的原因和解决办法。
  We know that the conveyor belt in the production process due to friction and material caused by the decline of large inclination of rubber belt surface, large inclination of heat-resistant conveyor belt is more likely to occur this situation, because transport, high-temperature materials are easily peeled by the impact of high temperature, all this happens, will greatly reduce the life of the conveyor belt. Now let's explain the reasons and solutions for belt peeling.
  大倾角输送带
  High Inclination Conveyor Belt
  首先,我们会了解输送带脱落的原因,首先,塑化后的输送带通过弯曲辊粘住了肮脏的物料,这将使输送带脱落;二是增塑剂在输送带中沉淀,使输送带层间粘度和强度大大降低,导致剥离。
  First of all, we will understand the reasons for the belt falling off. First, the plasticized belt sticks dirty materials through the bending roll, which will make the belt falling off. Second, the plasticizer precipitates in the belt, which greatly reduces the interlayer viscosity and strength of the belt, leading to stripping.
  那么如何解决高倾角输送带表面的剥落问题呢?
  So how to solve the problem of stripping on the surface of high inclined conveyor belt?
大倾角输送带
  首先,我们要检查适合输送带的材料和合适的生产环境。如果不能选择合适的输送带,那么大角度输送带的使用寿命将大大降低。其次,操作人员必须进行相应的输送带运维专业知识培训,必须对设备进行相应的检查,发现故障问题必须及时处理,防止更大事故的发生。第三,大角度输送带的模型应与输送带装置相匹配,不匹配的输送带会导致输送带损坏。
  First of all, we need to check the suitable material and production environment for the conveyor belt. If the suitable conveyor belt can not be selected, the service life of large angle conveyor belt will be greatly reduced. Secondly, operators must carry out the corresponding professional training of conveyor belt operation and maintenance, must carry out the corresponding inspection of equipment, find fault problems must be dealt with in time to prevent the occurrence of larger accidents. Thirdly, the model of large angle conveyor belt should be matched with conveyor belt device. Unmatched conveyor belt will lead to damage of conveyor belt.
  这是造成大倾角输送带损坏的主要原因。用户应采取适当措施,防止皮带异常磨损。
  This is the main reason for the damage of large angle conveyor belt. Users should take appropriate measures to prevent abnormal wear of belt.
更多的内容可以点击官网进行咨询:http://www.huafengxiangsu.com/
For more information, click on the official website: http://www.huafengxiangsu.com/

产品中心 PRODUCT CENTER

联系我们CONTACT US

手机:13791000079(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区